High-Speed 3D printing filament

The BigRep PRO HS is the new filament for FDM 3D Printing

2.5 Kg • 4.5 Kg • 8.0 Kg

The PRO HS is an innovative, robust and biodegradable material with the same mechanical properties as the PLA but with a high extrusion rate, enabling large-scale 3D printing at higher speed.

Our mission at BigRep is to enable the cost-efficient production of industrial parts. Our 3D printers produce large-scale parts at a lower cost than traditional prototyping methods. With the high-speed 3D printing filament BigRep PRO HS, it is now possible to reduce production time and costs even more. This new FDM filament prints faster than any other material on the market.

Watch the Pro HS in Action

high-speed 3d printing filament

This filament was created using biopolymers, which makes it sustainable and biodegradable. The extrusion of the PRO HS is possible at a low temperature (170°C), it means that the production with PRO HS needs less energy than with other materials, lowering their environmental impact. As it is not oil based, the PRO HS is also a very good ecological alternative to ABS.

The PRO HS can be used in every industry field producing mid to large-scale patterns or ready-to-use prototypes at high-speed and high-quality. This innovative material reduces production times in 3D printing by up to 50 percent and makes your additive manufacturing process more efficient and cost-effective.

The PRO HS is the second filament of the industrial family of filaments (with the PRO HT). It is available in two colors: natural and basalt, and in three different spool sizes (2.5, 4.5 & 8 kg) in 2.85mm diameter.

Comparison Chart: Massflow in grams per hour

Comparison chart Mass flow in grams per hour

With the BigRep Pro HS Filament we have developed a versatile material. In addition to the significantly reduced printing time, a major advantage of the product is that machines do not need to be modified for the application. It can be used on both new and older BigRep models. Especially when working with our large-format printers BigRep ONE and BigRep STUDIO, we offer our customers a flexible, complete solution for the most diverse requirements.” – René Gurka, CEO, BigRep GmbH

Properties

Filament Net Weight: 2.5 / 4.5 / 8.0 Kg
Material: BioPolymer
Density: 1.4 g/cm³
Diameter: 2.85 mm
Print Temperature Guideline: 170 - 210 °C
Heating Bed: 0 - 60 °C
Heat Distortion Temperature (ISO 75): 48 °C
Tensile Strength (ISO 527): 43 MPa
Impact Strength (ISO 179): 59 KJ/m²
Flexural Modulus (ISO 178): 3500 MPa

Specifications Safety Sheet

Discover more filaments

Visit our shop