Durable and Impact-Resistant

BigRep PETG is ideal for 3D printing projects requiring strength, toughness and thermal resistance in a filament.



The material is full compatible with all FFF open-build 3D printers, and has been optimized for use on BigRep large-scale machines, for a wide range of applications.

PETG at a glance:

  • High printing speed
  • Thermal resistant
  • Extrudes between 190-240°C
  • Minimal shrinkage and warping effect
  • Strong first-layer adhesion to heated print bed
  • Odorless

PETG is a suitable alternative to PLA or ABS, depending on requirements, as it possesses excellent strength, toughness, and temperature-resistant properties. BigRep PETG extrudes odorless and readily achieves a smooth flow at temperatures from 190 to 240°C, lending a glossy sheen to the transparent prints.

Filament Net Weight: 2.3, 4.5, and 8.0 kg
Material: PolyEthylene Terephthalate Glycol
Density: 1.27 g/cm³
Diameter: 2.85 mm
Print Temperature Guideline: 190 - 240 °C
Heating Bed: 80 °C
VST (ISO 306 VST A 120): 70°C
Tensile Strength (ISO 527): 50 MPa
Impact Strength (ISO 179): 7.2 KJ/m²
Flexural Modulus (ISO 178): 2145 MPa
Hardness (Shore):: D 78

Specifications Safety Sheet

Get a virtual demo and overview
of the new easier-than-ever PRO.


We use cookies and other tracking technologies to improve your browsing experience on our site, show personalized content and targeted ads, analyze site traffic, and understand where our audience is coming from.
By choosing I Agree you consent to our use of cookies and other tracking technologies.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

For perfomance reasons we use Cloudflare as a CDN network. This saves a cookie "__cfduid" to apply security settings on a per-client basis. This cookie is strictly necessary for Cloudflare's security features and cannot be turned off.
  • __cfduid

We embed videos from our official YouTube channel using YouTube’s privacy-enhanced mode. This mode may set cookies on your computer once you click on the YouTube video player, but YouTube will not store personally-identifiable cookie information for playbacks of embedded videos using the privacy-enhanced mode.
  • PREF
  • GPS
  • YSC

We track anonymized user information to improve our website.
  • GTM

This website uses ActiveCampaign (AC) as the designated CRM to track user interaction (trough AC cookies are necessaries but no IP or personal data will be saved if you don't convert on one of our forms (cookie visitorEmailAC). We use this to better understand how people interact with our site and to see their journey through the website.  
  • ac_enable_tracking
  • visitorEmailAC

Contains the current language of the admin and the user.
  • _icl_current_admin_language
  • _icl_current_language

Cookie required to allow a user to stay logged in to a web site without needing to submit their username and password for each page visited. Without this cookie, a user is unable to proceed to areas of the web site that require authenticated access.

These cookies are set by WordPress are used for indication and identification of the logged in user. Those are session cookies.
  • wordpress_logged_in_
  • wordpress_sec_
  • wordpress_test_cookie
  • wp-settings-
  • wp-settings-time-
  • utm_source
  • utm_campaign
  • utm_medium
  • handl_url
  • handl_landing_page
  • http_referrer

Decline all Services
Accept all Services